Loading... Please wait...

our newsletter

Account Navigation

  • Gift Certificates
  • Wish Lists
  • My Account
  • Order Status
  • KBS Coatings Diamond Fimish

DiamondFinish ClearCoat

Your Price:
$51.95
Quantity:

 

Product Description

DiamondFinish Clear

A tough Clear Coat that can be applied Direct To Metal or over other coatings. This water clear high gloss clear coat remains permanently flexible and is able to perform in the toughest environments without yellowing, cracking or peeling.
4oz: $19.95  |  Pint: $38.95  |  Quart: $51.95
Gallon: 193.95  |  5 Gal Pail: $789.95

 

DiamondFinish Clear - Overview

  • Formulated to Apply Directly Over Other Coatings or Direct To Metal (DTM)!
  • Permanent high solids (over 60%) and low VOC's Clear Coat.
  • Ideal for Direct To Metal (DTM) applications - No Additives Needed!
  • A Moisture Cured Urethane which is an advanced coatings technology offering durability, flexibility, corrosion and chemical resistance.
  • Apply directly to Painted Surfaces with Minimal Surface Prep.
  • Incredibly tough and hard like no other clear coat on the market.
  • Water clear high gloss clear coat remains permanently flexible and is able to perform in the toughest environments without yellowing, cracking or peeling.
  • Can be applied with a brush (without leaving any brush marks), roller and conventional spray gun.
  • Unlike normal two part coatings, no hardener is needed. You can just stir and go. DiamondFinish ClearCoat will cure without heat or UV lights in temperatures from 50° to 86° Fahrenheit.
  • Can be applied directly to a cured Automotive basecoat, Standard solid color paints, and Single Part or Two Part paints. It can also be applied to Non Ferrous metals including Aluminum, Alloys, Brass, Chrome and Copper.
  • Able to withstand the harshest of chemicals including fuels, solvents, Battery acid, Brake fluid, Ethanol, Methanol, MEK, Hydrochloric Acid, Fertilizers, and Acetone.
  • Graffiti Resistant: because of its chemical resistance, grafitti just won't stick and can be removed simply with a solvent soaked rag.
  • Great for high temperature automotive applications including the use on cylinder heads, engine blocks, brake components and even inlet manifolds, without yellowing up to 300° Fahrenheit.
DiamondFinish Clear - Features
  • Over 60% Solids
  • Direct To Metal Application - No Additives Needed
  • Apply directly to Painted Surfaces
  • Single Part Formula
  • Tougher and Harder than 2 Part ClearCoats
  • Seals both Paints & Metals
  • Self Leveling (No brush Marks)
  • Simple Brush or Spray Application
  • High Temperature resistance (300F) suitable for Motors and Brake Callipers
  • Permanent UV Stability
  • High Chemical Resistance (including fuels)
  • Graffiti Proof
  • Recoat in 1-2 hours
  • Seals Ferrous and Non Ferrous metals
  • Breakthrough High Solids Coating Technology

 

DiamondFinish Clear - Features

 

  • Over 60% Solids
  • Direct To Metal Application - No Additives Needed
  • Apply directly to Painted Surfaces
  • Single Part Formula
  • Tougher and Harder than 2 Part ClearCoats
  • Seals both Paints & Metals
  • Self Leveling (No brush Marks)
  • Simple Brush or Spray Application
  • High Temperature resistance (300F) suitable for Motors and Brake Callipers
  • Permanent UV Stability
  • High Chemical Resistance (including fuels)
  • Graffiti Proof
  • Recoat in 1-2 hours
  • Seals Ferrous and Non Ferrous metals
  • Breakthrough High Solids Coating Technology

DiamondFinish Clear - Applications

 

  • Protecting steel and plastic bumpers paint work.
  • Ideal for clear coating Fishing Lures and Crankbaits
  • Automotive aluminium fitting, fuel tanks and parts.
  • Protecting existing paint work from physical damage.
  • Stopping chemical attack from acids and alkalis on existing paint work.
  • Protecting paint work from all fuels.
  • Sealing motorcycle fuel tanks paint work.
  • Graffiti Protection.
  • Custom Automotive Refinish.
  • Marine internal and external Refinish.

 

 

DiamondFinish Clear - Coverage 

Theoretical coverage at one mil (25 µm) is 400 sq.ft. per gallon/9.8 m² per liter. Recommended thickness of at least two mils (50 µm) would require at least two full coats. At least three coats recommended for marine applications. Material losses during mixing and application will vary and must be taken into consideration. Please expect up to 50% less coverage on bare wood, rough or sandblasted surfaces.

  • 4oz of DiamondFinish Clear should cover 12.5 sq. ft. single coat coverage.
  • Pint of DiamondFinish Clear should cover 50 sq. ft. single coat coverage.
  • Quart of DiamondFinish Clear should cover 100 sq. ft. single coat coverage.
  • Gallon of DiamondFinish Clear should cover 400 sq. ft. single coat coverage.
  • 5 Gallon Pail of DiamondFinish Clear should cover 2000 sq. ft. single coat coverage.

Questions and Answers

Q: Can this clear coat be used over laquer and enamel paint?

Asked by: DuWayne A Miller - 9/12/2013
A: Yes, DiamondFinish Clear can be applied over fully cured lacquer or enamel paints.
 
Answer provided by: KBS Coatings (9/13/2013)
 
 

Q: What is the recommendation for wet sanding and buffing times?

Asked by: Rob - 10/14/2013
A: DiamondFinish Clear can be cut and polished as a normal Clear Coat after 24 hours under normal conditions.
 
Answer provided by: KBS Coatings (11/11/2013)
 
 

Q: Can you use Diamondfinish Clear Coat on 1986 fiberglass Bass boat top plate? Has been wet sanded.

Asked by: Gohmert - 9/7/2013
A: Yes. Wipe the fiberglass surface down with KBS Klean. Allow to dry. Then apply the DiamondFinish Clear. It would be best to apply 2-3 coats for a marine application.
 
Answer provided by: KBS Coatings (9/8/2013)
 
 

Q: Does the clean diamond finish clear coat come in a matte or satin finish?

Asked by: Ryan Pitman - 11/11/2013
A: At this time, the DiamondFinish Clear comes in a Gloss Finish. However, you can lightly sand the DiamondFinish Clear with steel wool after 24 hours to knock down the sheen.
 
Answer provided by: KBS Coatings (11/11/2013)
 
 

Q: Can diamond finish clear be used over rust seal? I'm looking to use rust seal as a color base coat on some automotive components (steering rack, transmission, differential...etc) and use clear to provide the UV protective layer/topcoat

Asked by: Carlton Brown - 10/28/2013
A: We do not recommend putting DiamondFinish Clear over RustSeal because although DiamondFinish Clear is absolutely UV stable, DiamondFinish Clear does not block the UV rays from getting through to the RustSeal. Over an extended period of time, DiamondFinish Clear can delaminate from RustSeal when exposed to prolonged sunlight.

We always recommend a solid color UV stable top coat paint (such as BlackTop or KBS Maxx) over RustSeal if RustSeal will be exposed to sunlight.
 
Answer provided by: KBS Coatings (11/11/2013)

 

 

Find Similar Products by Category

Product Reviews

Write review

  1. Clear Coated Gel Coat on Bass Boat

    Posted by Reviewed by: Sherman from Flint, MI on 9/13/2019 on 14th Feb 2020

    Used 2 qts Diamond Clear to put 2+ coats on 1979 fiberglass bass boat. The gel coat on boat was basically gone. Wet sanded and brushed/rolled Diamond Clear, results are astounding! Turned out far better than I had hoped. Six months later and still looks great! Follow the directions to a T and you'll be happy. Pics do not do it justice.


  2. Great Finish

    Posted by Reviewed by: Peter from Pleasant Grove UT on 10/21/2019 on 14th Feb 2020

    Great finish when applied properly it adheres and is a hard durable finish only urethane coating I’ve found that bonds with brass/bronze.


  3. Clear

    Posted by Reviewed by: bokinfish from Canyon Lake, TX on 1/7/2020 on 14th Feb 2020

    Great stuff works really well,easy to use, follow the directions and you will have flaw free coating. Problem I encountered was with the container. Practically destroyer the can trying to get it open (Regular paint type can). Be prepared to store in a different container.


  4. Clear

    Posted by Reviewed by: bokinfish from Canyon Lake, TX on 1/7/2020 on 14th Feb 2020

    Great stuff works really well,easy to use, follow the directions and you will have flaw free coating. Problem I encountered was with the container. Practically destroyer the can trying to get it open (Regular paint type can). Be prepared to store in a different container.


  5. Lure dip

    Posted by Reviewed by: Joe from Michigan on 2/4/2020 on 14th Feb 2020

    It works great for me I dip my crank baits in it and it works great


  6. KBS diamond

    Posted by Reviewed by: Matt from Protem, Mo. on 2/11/2020 on 14th Feb 2020

    I love this clear coat on my custom painted lures, quality hard shell finish and easy to use. I've dipped hundreds of lures and not one customer complaint. Thanks guys keep up the great work..


Back to Top

Click the button below to add the DiamondFinish ClearCoat to your wish list.