Loading... Please wait...

our newsletter

Account Navigation

  • Gift Certificates
  • Wish Lists
  • My Account
  • Order Status
  • KBS Coatings Gold Standard Tank Sealer

KBS Gold Standard Tank Sealer 4 sizes

Your Price:
$38.95
Quantity:

 

Product Description

Gold Standard Tank Sealer is a superior, single component, ready-to-use sealer formulated for coating the inside of metal, aluminum & fiberglass tanks.

Widely recommended & easy-to-use, this single application coating cures into a tough fuel impervious seal. The entire tank including pinholes & weld seams are permanently sealed to prevent the return of rust & corrosion and clogged carburetors.

The Tank Sealer's rock hard finish remains flexible to withstand vibration and the repeated expansion & contraction of the tank! Other sealers are little more than paint or adhesive-type coatings which have poor sealing abilities especially when exposed to today's fuels.

Wisely choose Gold Standard for an incredible long lasting seal! Satisfaction guaranteed!

 

Tank Sealer Coverage

  • 8oz of Gold Standard Tank Sealer will seal up to a 5 Gallon Tank.
  • Pint of Gold Standard Tank Sealer will seal up to a 12 Gallon Tank.
  • Quart of Gold Standard Tank Sealer will seal up to a 25 Gallon Tank.
  • Gallon of Gold Standard Tank Sealer will seal up to a 100 Gallon Tank.

 Gold Standard Tank Sealer is non-flammable and is environmentally safe.

 

 Tank Sealer Features

  • Silver metallic permanent coating
  • Eliminates all rust & corrosion
  • Impervious to all fuels, alcohol additives & most solvents
  • Permanently seals pinholes & weld seams
  • Flexible to expand & contract
  • Withstands Temperatures of up to 600°F
  • Non-flammable
  • Environmentally safe
  • Contains no Methyl Ethyl Ketone

 

Applications 

steel, aluminum & fiberglass fuel tanks • oil tanks • diesel tanks • utility tanks • non-potable water tanks

 

Questions and Answers 

Q: I have to seal just the base of a tank only. Can I coat part of the large tank with the Gold Standard Tank Sealer or is it necessary to cover entire interior?

Asked by: john joyce - 12/27/2014

 

A: It is always best to coat the entire inside of the tank. If you do not, you do run the risk of the Tank Sealer delaminating (peeling away) over time at the edges.
 
Answer provided by: KBS Coatings (12/29/2014)

 

Application Instructions           How much do I need?      Tank Sealer Flow Chart      MSDS

Product Videos

Sealing a Motorcycle Gas Tank with the KBS Cycle Tank Sealer Kit (10:45)
Watch Brad seal up a Motorcycle Gas Tank with the KBS Cycle Tank Sealer Kit which gives you everything you need to seal a tank of up to 5 gallons. Gold Standard Fuel Tank Sealer is specifically formulated to stop rust and corrosion by forming a tough, fuel impervious coating while simultaneously sealing small pinholes and weld seams. Check out the kit here: http://www.kbs-coatings.com/cycle-tank-sealer-kit.html
  • Sealing a Motorcycle Gas Tank with the KBS Cycle Tank Sealer Kit
    Watch Brad seal up a Motorcycle Gas Tank with the KBS Cycle Ta...

Find Similar Products by Category

Product Reviews

Write review

  1. So far so good

    Posted by Reviewed by: Darron Welch from Tillamook on 1/3/2018 on 15th Feb 2020

    Used this product on the tank from a 1966 Dodge D100. The tank had been previously taken to an acid dipping shop to be thoroughly cleaned of rust, old paint, road grime, etc. Since the metal was clean already, I skipped the KBS Klean and went straight to the etching product, the Rust Blast. After rinsing and drying, applied the Tank Sealer according to instructions. It has left a clearly visible layer lining the entire inside of the tank. The quart can had more than enough product to do the tank. The tank is not yet reinstalled, nor have I done the exterior of the tank yet, so the final verdict is not in yet. But everything looks good so far!


  2. this stuff really works.

    Posted by Reviewed by: mark from va on 1/3/2019 on 15th Feb 2020

    took a rotor tiller that was my dads and had been sitting for over twenty years at first look I thought there would be no way the gas tank was black it was so full of rust but after a week of soaking it to clean it I coated it and it look like a new tank it works.


  3. this stuff really works.

    Posted by Reviewed by: mark from va on 1/3/2019 on 15th Feb 2020

    took a rotor tiller that was my dads and had been sitting for over twenty years at first look I thought there would be no way the gas tank was black it was so full of rust but after a week of soaking it to clean it I coated it and it look like a new tank it works.


  4. Great product

    Posted by Reviewed by: Dave S from Hauppauge on 3/20/2019 on 15th Feb 2020

    Used to seal my tank. Easy to use, worked great.


  5. Great product

    Posted by Reviewed by: Dave S from Hauppauge on 3/20/2019 on 15th Feb 2020

    Used to seal my tank. Easy to use, worked great.


  6. Fiberglass motorcycle tank

    Posted by Reviewed by: Brad Corder from Gosport,In. on 4/30/2019 on 15th Feb 2020

    Used to seal a fiberglass motorcycle tank and was very impressed by how well it sealed the leaks! Very easy to apply and very durable!


  7. Smooth as silk

    Posted by Reviewed by: Rich from Hayward, CA on 12/3/2019 on 15th Feb 2020

    After a complete cleaning and treatment with "Rust Blast". I followed the instructions and installed what appears to be a secondary tank inside my tank. The material flowed excellently and set up in a timely manner. I am still working on refinishing the outside of my tank so I have yet to put ant gas in it, but I think it will now stand the test of time.


Back to Top

Click the button below to add the KBS Gold Standard Tank Sealer 4 sizes to your wish list.