Loading... Please wait...

our newsletter

Account Navigation

  • Gift Certificates
  • Wish Lists
  • My Account
  • Order Status
  • KBS #1 Thinner - VOC Free - VOC Exempt - Paint Thinner

KBS #1 Thinner is a Low VOC paint thinner used for the thinning and clean up of RustSeal and our other KBS Coatings Paints.

KBS Thinner

Your Price:
$15.95
Quantity:

 

Product Description

KBS #1 Thinner - VOC Free - VOC Exempt - Paint Thinner

KBS #1 Thinner is a Low VOC paint thinner used for the thinning and clean up of RustSeal and our other KBS Coatings Paints.

Make sure to only use KBS #1 Thinner for the thinning of RustSeal and our other Rust Preventive Paints. Regular solvents may contain moisture that can adversely affect the performance of our coatings.

Also, keep some KBS #1 Thinner on hand for your immediate clean up needs.

 

Find Similar Products by Category

Product Reviews

Write review

  1. kbs diamond clear coat and #1 thinner

    Posted by Reviewed by: sammy reliford from Alma , Ga on 4/20/2017 on 15th Feb 2020

    I think it is a very good clear coat I use it on fishing lures crankbaits and it works very well and is very durable so far I also like the easiness of it dip it and hang it I usually do 2 coats but I love it no more mixing 2 part epoxy for me and I think its more durable than 2 part epoxies so thanks for a great product and if you have any new products I will be glad to test them for you again thanks


  2. Diamond finish Clear Coat

    Posted by Reviewed by: John Pobjecky from Simpsonville, SC on 5/3/2019 on 15th Feb 2020

    I needed to replace the trailer fenders on my EZ Loader tandem boat trailer. The replacement components were raw steel and were going to need paint. I did not feel like taking the time to prep, prime and color paint so I looked for a product that could be applied direct to metal and came upon KBS Coatings’ Diamond Finish Clear. I prepared the raw steel by sanding out any surface rust stains then washing with KBS #1 Thinner. I have an HVLP system but I did not have the 1.4 mm tip recommended. I thinned the clear approximately 30% but probably should have gone to a higher ratio due to the tip size. It was my first time using this product so I stayed with the product directions. The clear sprays out nicely and was applied in multiple thin coats also as instructed. Drying time is slower than I would have liked stretching out the paint time for three coats to four hours. I do not have a paint booth and as such, had to paint outside of my garage. The two hour wait between coats was an invitation for all airborne ‘boogers’ to land on my paint job! KBS Diamond Clear is TOUGH! Once cured nothing can remove it. Just what I wanted for these fenders! The can in which the paint is packaged was a killer, however! No way was that cover going back on the can therefore the four star rating. Overall I’m very happy with the look of the product on the steel fenders and it really dresses up the trailer.


  3. great thinner

    Posted by Reviewed by: oldplow from new albany, oh on 8/19/2019 on 15th Feb 2020

    Purchased this with top coat to spray my frame. This is great stuff, used with rust seal. Only thinned about 5 percent. Worked great at cleaning my spray equipment.


Back to Top

Click the button below to add the KBS Thinner to your wish list.