Loading... Please wait...

our newsletter

Account Navigation

  • Gift Certificates
  • Wish Lists
  • My Account
  • Order Status
  • Currency Converter

    Change

KBS UnderCoat

undercoatings-header.jpg

 

KBS UnderCoat provides protection in wheel wells, gas tanks, frames, quarter panels, fenders, undercarriages, hoods, decks, and floor pans.

KBS UnderCoat produces a very tough, yet flexible film with excellent adhesion, and helps prevent road salt from eating away at your car's metal and fiberglass.

KBS UnderCoat offers excellent adhesion to metal or painted surfaces.

KBS UnderCoat provides economical paintable durability, plus moisture resistance & corrosion resistance, all in a matte black finish.

KBS UnderCoat also provides sound deadening by reducing road noise and vibration.

KBS UnderCoat Features

  • Asphalt based
  • Sound-deadening properties
  • Chip resistant
  • Corrosion protection
  • Easy to apply
  • Excellent adhesion to metal
  • Excellent adhesion to painted surfaces
  • Dry To Touch In 1 Hour / Handle In 2 Hours
  • Uniform appearance

 

KBS UnderCoat Applications

TIP: For the ultimate rust protection, follow the KBS 3-Step System and treat the bare metal areas with RustSeal before applying KBS UnderCoat. KBS UnderCoat will have excellent adhesion to cured RustSeal.

  • Wheel Wells
  • Gas Tanks
  • Frames
  • Quarter Panels
  • Fenders
  • Undercarriages
  • Hoods
  • Decks
  • Floor Pans

 

At this time, the KBS UnderCoat just comes in a matte black finish similar to a standard undercoating but much more durable and uv stable than standard undercoatings.

UnderCoat Coverage

  • Quart covers up to 14 sq ft.
  • Gallon covers up to 56 sq ft.
  • 5 Gallon Pail covers up to 280 sq ft.

 

 

 

 

APPLICATION INTRUCTIONS

1. Surface should be clean and dry. Shake can well before using.

2. KBS UnderCoat is applied through an auto body Schutz applicator type spray gun. You can attched the quart size can directly to your spray gun or KBS UnderCoat contents may be poured into a clean container pot which fits your applicator gun. Excess coating may be removed with KBS #1 Thinner.

3. For best results use between 70°F and 90°F with 50%, or less, humidity. Apply in light coats waiting about 10 minutes between coats. Coating will be dry to the touch in 60 minutes Full cure in 2-4 hours.

4. For the ultimate rust protection, follow the KBS 3-Step System and treat the bare metal areas with RustSeal before applying KBS UnderCoat. KBS UnderCoat will have excellent adhesion to cured RustSeal.

 

Sort by
Back to Top