Loading... Please wait...

our newsletter

Account Navigation

  • Gift Certificates
  • Wish Lists
  • My Account
  • Order Status
  • RustBlast the strongest phosphoric acid solution you can buy without a license.
  • Image 2
  • RustBlast the strongest phosphoric acid you can buy without a license.
  • RustBlast the strongest phosphoric acid solution you can buy without a license.

RustBlast

RRP: $33.95
Your Price:
$32.95 (You save $1.00)
Quantity:

 

Product Description

RustBlast Overview

RustBlast is a powerful rust remover, zinc phosphate pre-primer, and metal etch. RustBlast effectively dissolves rust, corrosion, metal oxides, and tarnishing from most metal surfaces. Ideal for removing rust from chrome surfaces.

 

RustBlast Features

 

  • Removes & neutralizes rust
  • Pre-paint primer
  • Provides etched surface profile for solid adhesion
  • Leaves a zinc phosphate base coating
  • Enhances welding conductivity
  • Non-flammable, no petroleum additives
  • Non-corrosive
  • Water-based, biodegradable

 

RustBlast Applications

 

  • steel
  • cast iron
  • brass
  • aluminum
  • galvanized
  • copper
  • steel alloys

 

  • fiberglass
  • other non-metallic surface
  • concrete
  • rust removal
  • metal etching
  • mill scale removal
  • pre-paint surface treatment

 

 

 

RustBlast Coverage

 

  • Gallon of RustBlast for each Gallon of RustSeal
    *Gallon comes with Sprayer and Bottle
  • Quart of RustBlast for each Quart of RustSeal
    Quart Comes with Sprayer
  • 8oz of RustBlast for each 8oz of RustSeal

Questions and Anwsers

Q: Is RustBlast safe if it is gets on wiring, rubber, etc. during the process of using it on a car chassis?

Asked by: Mike - 1/2/2014
A: Yes, as long as the contact is casual and the RustBlast is rinsed off with water, RustBlast should not affect your wiring and rubber components.
42 of 48 Customer(s) found this Answer helpful.
Answer provided by: KBS Coatings (1/17/2014)
 
 

Q: If I have new steel, do I have to let the RustBlast stay wet on the surface for the minimum of 30 minutes or can I do less time?

Asked by: YoYo - 12/4/2014
A: New steel is usually very smooth, so we highly recommend leaving the surface wet with RustBlast for a minimum of 30 minutes so that you have an ideal surface profile when you go to apply the RustSeal. Also, remember to keep the surface temperature as warm as possible (within our temperature guidelines) because the warmer the RustBlast is, the more effective the RustBlast is.
23 of 25 Customer(s) found this Answer helpful.
Answer provided by: KBS Coatings (12/4/2014)
 
 

Q: Can you use RustBlast on aluminum?

Asked by: Mark - 4/27/2015
A: RustBlast works very well on aluminum to etch the aluminum allowing excellent adhesion of paint.
21 of 24 Customer(s) found this Answer helpful.
Answer provided by: KBS Coatings (4/30/2015)

 

Find Similar Products by Category

Product Reviews

Write review

  1. great product, great service

    Posted by Reviewed by: Bob from SAINT CHARLES on 6/14/2018 on 12th Feb 2020

    RustBlast did a great job of removing light rust and preparing the steel for paint. Heavy rust is a lot more of a problem. I do recommend the product. Great service and quick shipping. Will buy from again.


  2. Best

    Posted by Reviewed by: John Morgan from Anna on 1/25/2019 on 12th Feb 2020

    Best products I have used for auto restoration.


  3. Best

    Posted by Reviewed by: John Morgan from Anna on 1/25/2019 on 12th Feb 2020

    Best products I have used for auto restoration.


  4. KBS Blast

    Posted by Reviewed by: David from Greenville on 3/4/2019 on 12th Feb 2020

    It works, the more elbow grease the better the out come. (showing my age now ha ha )


  5. 28 Chevrolet

    Posted by Reviewed by: Jeff J from Tucson on 3/14/2019 on 12th Feb 2020

    Currently rebuilding a 1928 Chevrolet Roadster. This is the third car I have used KBS products on. They are easy to use and work as advertised. The photo is of the last car I used KBS products, a 1929 Model A, now my daily driver.


  6. Great Metal Prep!

    Posted by Reviewed by: Chad Mills from Wakarusa, Indiana on 3/15/2019 on 12th Feb 2020

    Awesome metal prep for pre-primer after media blasting!


  7. Great for prep

    Posted by Reviewed by: BA from St. Louis, MO on 10/30/2019 on 12th Feb 2020

    I deal with many rusty parts doing mechanical restorations. Didn't really have any type of rust inhibitor or anything other than wiping down or blowing off with compressed air. Now using RustBlast after cleaning I can see the extra rust that was left on the parts when rinsing them off.


  8. The Good Stuff

    Posted by Reviewed by: Rich from Hayward, CA on 12/3/2019 on 12th Feb 2020

    While my tank was already fairly rust free internally, I did go ahead and give it the " Blast" just to insure a good bond with the "Gold". It looked even cleaner after the " Blast" treatment.


Back to Top

Click the button below to add the RustBlast to your wish list.