Loading... Please wait...

our newsletter

Account Navigation

  • Gift Certificates
  • Wish Lists
  • My Account
  • Order Status
  • Top Coater from KBS Coatings

Top Coater

RRP: $47.95
Your Price:
$45.95 (You save $2.00)
Quantity:

 

Product Description

 

KBS Top Coater Overview

Maximum Coverage and Professional Looking Results!

KBS Top Coater is a superior spray paint formulated for maximum coverage and professional looking results. KBS Top Coater is an ideal top coat paint for RustSeal when the area will be consistently exposed to sunlight.

KBS Top Coater is a very high solids paint does not run or sag, and gives at least twice the coverage of conventional spray paints. KBS Top Coater can be applied to bare metal, but for ultmate performance, apply KBS Top Coater over RustSeal.

 

KBS Top Coater Features

  • Rock Hard Yet Flexible Coating
  • Excellent Adhesion to Paints and Primers
  • Professional Fan Pattern Sprayhead
  • High Solids Formulation Provides Excellent Hiding Qualities
  • Does Not Fade
  • Does Not Run or Sag
  • Twice The Coverage of Conventional Spray Paints
  • Chemical Resistant
  • Outstanding Adhesion
  • Fast Drying
  • Excellent Durability
  • High Temperature Resistanc: Withstands Up To 300°F

 

KBS Top Coater Applications

Cars • Motorcycles • Wheels • Bicycles • Commercial Vehicles• Snow Plows • Fleet and Municipal Vehicles • Tractors • Agricultural Equipment • Construction Machinery • Trains • Boats & Yachts • Personal Watercraft • Woodwork • Tools • Doors • Aerospace

 

KBS Top Coater Coverage

Note: As a general rule for most applications, 2 coats are usually ideal.

Quart of KBS Top Coater should coat up to 175 sq. ft. with 1 coat coverage and 90 sq. ft. with 2 coat coverage.

Gallon of KBS Top Coater should coat up to 700 sq. ft. with 1 coat coverage and 350 sq. ft. with 2 coat coverage.

Material losses during mixing and application will vary and must be taken into consideration. Expect up to 50% less coverage on bare wood, rough or sandblasted surfaces.

 

KBS Application Instructions

KBS Top Coater is a superior aerosol spray paint formulated for maximum coverage and professional looking results.
KBS Top Coater is an ideal top coat paint for RustSeal when the area will be consistently exposed to sunlight.
KBS Top Coater is a very high solids paint does not run or sag, and gives at least twice the coverage of conventional spray paints.
To achieve expert results, please take the time to carefully read and understand the following directions before you begin your restoration project. If you have any remaining questions or concerns, please call us toll-free for technical assistance.


ALWAYS WORK IN A WELL-VENTILATED AREA. A NIOSH/MSHA APPROVED AIR SUPPLIED RESPIRATOR IS RECOMMENDED. ALWAYS WEAR PROTECTIVE GLOVES AND EYEWEAR.


SURFACE PREP:
FOR THE BEST END RESULTS, apply KBS Top Coater to clean & dry surfaces that have been sealed with RustSeal. If needed, use KBS Klean to remove all surface contaminants. (Avoid solvent-based cleaners which leave invisible residues that can affect the adhesion of KBS Top Coater.) To topcoat freshly painted RustSeal surfaces (between 3 and 8 hours old), apply KBS Top Coater directly as no other prep is required. For all other applications, lightly sand/scuff with 320 grit paper then clean & dry surface before applying KBS Top Coater.


SPRAY APPLICATION:
For best results, Apply KBS Top Coater to prepared surfaces as described above. ALWAYS WEAR PROTECTIVE GLOVES AND EYEWEAR when using KBS Top Coater. Always use NIOSH/MSHA approved air supplied respirator. For best results, spray at room temperature 50° to 90°F (10° to 32°C). Use only in moderate to dry atmospheric conditions (i.e. 70% humidity or lower). Shake can for at least one minute after listening for rattle or mixing ball. During application, shake intermittently for approximately 10 seconds at 1 to 2 minute intervals. Press valve all the way down. Do not extend finger beyond the valve. Hold container about 8 to 10 inches from surface to be sprayed. Do not cover with continuous spray. Move back and forth, releasing sprayhead after stroke. Overlap each stroke.
If clogging develops, turn sprayhead 1/4 turn or remove and clean sprayhead. Do not stick pin or other objects in to can opening. With sprayhead pointed away from you, reinsert sprayhead with gentle twisting motion.

IMPORTANT: Apply thin coats rather than heavy coats. If paint runs or sags, paint is being applied too heavily or paint can is too close to surface. Apply one or two thin covering coats for general automotive applications. For marine or industrial applications, apply a minimum of 2 - 3 thin covering coats. Recoating can be done once first or consecutive coat is dry-to-touch. For best results, always apply coats consecutively within 24 hours of each coat curing. Average recoat cure times are 1-2 hours depending on humidity levels. Full cure is usually achieved witin 24 hours.
To clear sprayhead for future use, turn can upside down and spray for 3 seconds.

CLEAN UP:
Clean up any overspray with KBS #1 Thinner or lacquer thinner immediately. Always wear protective gloves to avoid skin contact and temporary staining.
Please remember these instructions are general guidelines only and do not cover every application and environment. If you remain unsure as how to proceed, refer to product instruction sheet, our website: KBS-Coatings.com,
or call for technical advice at 1-219-263-0073.
Please follow all warning and caution notices. See SDS for additional information.
Made in the USA.
Information contained herein is to our knowledge true and accurate, but all recommendations or suggestions are made without guarantee. Since application lies outside our control, we cannot accept any liability for the results. User shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.

KBS Top Coater Support

Directions & Application Information
COATER COATERTOPTOPTOPKBSKBSKBS
KBS Support Forum
success.KBS-COATINGS.com
KBS FAFAQ’s & Support Tickets
helpdesk.KBS-COATINGS.com
Complete How-To’s
KBS-Coatings.com
KBS Online Instructional Videos
View 3-Step System Application Videos
Available on KBS-Coatings.com
1-877-548-9323 KBS-Coatings.com

Questions and Answers

 

Q: Do I need to thin KBS Top Coater if I want to spray with an HVLP?

Asked by: Franklin - 6/28/2019
A: Yes, you can spray KBS Top Coater with an HVLP. Spray pressure (at the gun) of at least 30psi and 1.8mm Spray Tip. Thin 10-20% as required. Use only KBS #1 Thinner. Apply thin coats rather than heavy coats. If paint runs or sags, paint is being applied too heavily or spray gun is too close to surface. Apply at least one or two thin covering coats. Recoating can be done after 8 hours and before 7 days.
 
Answer provided by: KBS Coatings (6/28/2019)
 
 

Q: I would like a brush on top coat. Does this product brush out well?

Asked by: Jeff - 3/7/2019
A: KBS Top Coater was designed to be brushed on. When you brush KBS Top Coater on, the brush marks disappear and look like powder coating.
TIP: When brushing KBS Top Coater, apply thin, covering coats and do not overwork the brush as this can cause KBS Top Coater to cure too quickly possibly leaving visible brush marks. It is always best to brush an area and move on immediately versus brushing an area over and over again. If you brush over an area over and over again, you force the solvents out and run the risk of the brush marks not flowing out as well they are designed to flow out.
 
Answer provided by: KBS Coatings (6/28/2019)

 

Find Similar Products by Category

Product Reviews

Write review

  1. Lawn Furniture

    Posted by Reviewed by: Owen from Tulsa, OK on 8/8/2018 on 16th Feb 2020

    I sandblasted some rusty nasty lawn furniture. Applied a few coats of Rustseal and then brush this on. Safety yellow. Looks great. Covered very well and brush marks flowed out super well. I love the final look.


  2. Great over Rust Paint

    Posted by Reviewed by: Greg G from Athens, GA on 2/27/2019 on 16th Feb 2020

    I brushed this over my house door that I coated with your rust paint because my door always rusts from the bottom of the door up. I did grey rust paint and forest green for this paint. It brushed out beautifully and looks great.


  3. Great over Rust Paint

    Posted by Reviewed by: Greg G from Athens, GA on 2/27/2019 on 16th Feb 2020

    I brushed this over my house door that I coated with your rust paint because my door always rusts from the bottom of the door up. I did grey rust paint and forest green for this paint. It brushed out beautifully and looks great.


  4. Great UV Resistant Top Coat

    Posted by Reviewed by: William from Roselle, Illinois on 8/24/2018 on 16th Feb 2020

    Used Top Coater to paint a semi truck roof that had clear coat failure due to many years of UV light damage. The color red was close enough to the original but eliminated the excessive prep work of cleaning, sanding, masking (or paying) for a spray job. It brushed on smooth, offers great coverage and is enduring the UV rays just fine. A good inexpensive alternative to a booth paint job for a working semi truck that is constantly out in the elements. Highly recommended!


  5. Great UV Resistant Top Coat

    Posted by Reviewed by: William from Roselle, Illinois on 8/24/2018 on 16th Feb 2020

    Used Top Coater to paint a semi truck roof that had clear coat failure due to many years of UV light damage. The color red was close enough to the original but eliminated the excessive prep work of cleaning, sanding, masking (or paying) for a spray job. It brushed on smooth, offers great coverage and is enduring the UV rays just fine. A good inexpensive alternative to a booth paint job for a working semi truck that is constantly out in the elements. Highly recommended!


  6. Coated Metal Picnic Table

    Posted by Reviewed by: Ed from Naples, FL on 3/1/2019 on 16th Feb 2020

    Blasted the metal legs on picnic table. Put down 2 coats of rustseal and then 1 coat of medium grey top coater. Looks great. No brush marks. Seems very durable.


  7. 70 Camaro - Looks Great

    Posted by Reviewed by: Bradley C from Knoxville on 3/15/2019 on 16th Feb 2020

    using your products for rust prevention and finial coating under the car and sub frame. Products works and looks great.


  8. great

    Posted by Reviewed by: richie from NORWELL on 12/17/2019 on 16th Feb 2020

    good product works just as it said flows nice with brush or foam roller


Back to Top

Click the button below to add the Top Coater to your wish list.